LOW PROFILE CAB FOR TRACTOR
- Customer pickup,
- In detail
- Country of manufactureBelarus
We offer low-profile cabins for the Belarus tractors of 800 and 900 series (MTZ-820/920) with the right arrangement of the check point, with the central switching to the check point and two types of a guard of devices for the 70th and 80th series of tractors (MTZ-80/82). Tractor height with this cabin does not exceed 2550 mm on wheels 16.9R38.
DESCRIPTION OF THE CABIN:
1. A cabin framework - six rack-mount of a profile pipe 50х50
2. The cabin roof - metal of a leaf of 1.2 mm opens in back part of a cabin for natural ventilation.
3. Cabin doors - are equipped with locks with double fixing and blocking of opening from within a cabin. Have the fixing mechanism in open situation.
4. A back frame - opening with the fixing mechanism in open situation.
5. Cabin wings - 1.2 mm, metal from a leaf, with amplifiers for increase in durability at excess vertical loadings. Are equipped with mudguards.
6. A cabin glazing - tempered to 5 millimetric flew down in a rubber sealant.
7. Sealing of a cabin - apertures of the opening elements of a cabin are condensed with the rubber reinforced profile and sealing by silicone sealant in possible places of penetration of moisture and dust in salon of a cabin is made.
All welded seams are covered with special sealant for sealing of a cabin.
8. Vibration insulation - a floor and niches of a cabin are covered 2nd with a millimetric layer of anti-vibration material on the basis of bitumen.
9. Cabin upholsteries - from DVP covered 10 with a millimetric layer of foam rubber and fitted vinilizkozhy.
10. Screen wipers - forward electric. Back on the manual drive.
11. Electric equipment - a complete set of plaits on a cabin, a roof and an accumulator compartment with laying of the power cable to a starter. Working lobbies and back headlights, road train lamps. Forward and back dimensions. Switch of weight, command key and plafond of illumination of a cabin.
12. The cabin footboard - is located on the left side of a cabin.
13. The control panel - is located on the right side. All openings on an arrangement and fastening of governing bodies completely correspond to the analog.
14. Cabin mirrors - two mirrors located on a forward wall of a cabin.
15. The operator's seat - without suspension bracket with the reduced TOS.
16. Governing bodies - installation of all governing bodies, and also a steering column and guard of devices depending on the coordinated complete set is possible. Work on a complete set to be provided within the contract of delivery is possible.
17. Heating of a cabin - the heater is located in the right bottom corner of a cabin.
18. Installation and dismantle - it is equipped with places for installation and dismantle of a cabin.
• Any complete set of a cabin depending on your wishes and technical requirements to the delivered production is possible.
For creation of new shape of a cabin the forward wall of a cabin with application of the Austrian profile for an insert of windshields was bent.
The roof and wings of a cabin will be made of composite steklonapolnenny materials.
In an interior of a cabin plastic materials from ABS plastic the formations received by method vacuum will be used.
All sheet details are made by means of laser cutting and are flexible according to the developed 3-D models.
Six rack-mount framework, rear-view mirrors, footboards, working headlights / lamps, complete set of an electrical wiring on a roof and a cabin, forward and back screen wipers, locks with double fixing and blocking of opening from within a cabin, yubochny panels of a guard of devices, a rubber covering of a floor, wings with mudguards, soft noise-insulating finishing of an interior, the opening back frame with the fixing mechanism in open situation, the opening metal roof with a plafond of lighting and command keys, a podressorenny seat with the adjustment mechanism on the operator's weight.
The heater, control levers and guard of devices are established at the request of the customer.