- Country of manufactureBelarus
- Car makeГАЗ
- Type of specialization transАвтогидроподъёмник
- Wheelbase4Х2 "
- Car suspensionConventional suspension
- Type of special machineryАвтогидроподъёмник
Name of indicators
|Loading capacity of a cradle, kg, no more||
|Operating height of rise, m||.|
|Leading dimensions in transport situation, mm:||.|
|Full mass of the elevator, kg,||
|Load dispatch on the road from the elevator of full weight, kg, not a bolee:n a front axle||
|on a rear axle||
|Arrow turning angle, °||
360 it (is not limited)
|Working pressure in a hydraulic system, MPa||
|The maximum angle of lead overcome by the elevator, %||
|Maximum transport speed of the elevator, km/h||
|Index contour, m, not less||
|Time of raising of a cradle for the greatest height, with||
|The maximum rotating speed of rotary part, with-1 (RPM)||
|Engine speed at normal operation of the elevator, mines||
|The greatest corner of a bias of a charging floor, °||
|Maximum allowable speed of wind during the work (on vys. 10 m), m/s||
|Working fluid of a hydraulic system||
Gidravlik Zima MNC 22
Operator console on rotary part and the panel in a cradle
|Way of management||
Electrohydraulic with proportional control
The elevator is intended:
- for raising of working materials and the tool on height of 18 meters when performing construction, maintenance, electrotechnical functions;
- performance of work at height in the electric units which are energized to 10 kV at installation of an elektroizolirovany cradle;
- service of power lines, buildings, constructions and devices of municipal municipal services.
Distinctive features of the hydraulic auto lift
PMS-318-02 with a proportional control system
- Traffic control of an arrow is exercised of the proportional adjuster of a consumption of working fluid of IntegratedHydraulics firm in a tandem with the Hydrocontrol hydrodistributor. This combination allows to regulate the motion speed of operating parts from zero to a maximum with gradient junction.
- Replacement of OPU+ the Reducer on a turn reducer "three in one" (OPU+ a reducer + the hydromotor) firmymetahydraulics with the additional block of protection, allows:
- Lower engineering time;
- Provide smooth rotation of an arrow around an axis without restriction of a turning angle;
- Provide a smooth stop with adjustment of rotational speed.
- Control of working operations is exercised by means of the unimode joystick and the button of the choice of operations of Fabercom firm from any of the panels located on a pivoting frame and in a cradle
- Application in electrodistributing of cable entries of Lappcabel, Tyco-Electroniq connectors, water protective switches, the Mollen buttons, body of ELS panels and terminal contacts of Wago has allowed to increase significantly reliability of work, tightness of connectors and to reduce environmental activity on contacts of connectors.
- The system of hydraulic control is constructed on elements of world famous firms Hydrocontrol, ABCO, Luen, Kladivar, Sofima. In combination with working fluid of a hydraulic system - oil of Gidravlik Zima 22 MNC - it allows to increase reliability and a resource of work.